BD Crawler LCG Chassis KAASBERRIE - 4mm Carbon Fiber - Axle Servo Mount

This is the NEW BD Crawler LCG Chassis ‘KAASBERRIE’

While most carbon fiber chassis rails are 3mm or even 2.5mm thin, this chassis is lasercut out of extremely strong 4mm carbon fiber. This makes it extra strong and stiff and is still lighter than most chassis’.

This chassis is only for axle on servo mount and has extra suspension clearance in front and back compared to the ASM-01 and CSM-01 chassis.  It’s also 0.590″/15mm shorter to get a better approach and departure angle.

• Laser cut from .157″ / 4mm Carbon Fiber.
• Extremely strong and extremely light: 2.9 oz / 85 grams (pair)
• Perfect chassis for portal axles and straight axles
• Lots of options as far as mounting braces, upper links, etc.
• Compatible with most parts for Axial SCX10 II and Element RC Enduro with minor modifications
• Most basic components are sls 3d printed in PA12.
• All components come with stainless steel screws

Chassis comes with:

• Carbon Fiber rails
• SLS PA12 3D printed Skidplate
• 3D printed front bumper
• 3 spacers
• BD Crawler sticker set

• IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure your hardware will not bottom out in the screw pocket. This can also cause 3D printed parts to break prematurely.
• Due to the nature of 3D printing, items may contain some visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit. Similar to what you would expect to do with model parts.